Product Name : WTLU-D35
Product Description
This double sided laminating system incorporates the use of highly efficient electrically heated press rolls which simultaneously apply decorative paper, impregnated finished foils or PVC foils onto flat substrate boards continuously.
Product Introduction

proimages/p1/product1_1.jpg

proimages/p1/product1_1b.jpg

ADVANTAGES OF OF SYSTEM

  1. Products can be cut immediately after lamination.
  2. Harder laminated surface.
  3. Better pore filling when using inferior quality boards.
  4. Excellent adhesion and high stability under damp and hot conditions.

FEATURES

  1. Breakthrough technology incorporating specially Modified urea formaldehyde glue with hardener and resin applied by separate spreaders.
  2. High productivity up to 40 metres / min.
  3. This line is capable of simultaneous double sided lamination.
  4. The electrically heated press rolls are specially constructed to realise a high and even temperature of 200°C in a short time. This high temperature is critical for an excellent glue bond.

  1. RAW MATERIALS NEEDED :
    Plywood, particleboard, cardboard, MDF board, etc.
    Decorative printed paper or PVC foils.
    Urea formaldehyde glue for impregnated finished foils.
    PVAc emulsion glue for paper.
    EVA emulsion glue for PVC foils.
  2. BOARD SIZE :
    All flat boards of the following sizes may be used:
    Thickness: 2-30 mm
    Width: 900-1250 mm
    Length: 1800-2470 mm
  3. CAPACITY: Line speed capability :
    5-40 meteres per minute
  4. NUMBER OF OPERATORS:
    2 operators for the whole line
  5. ELECTRIC POWER:
    Motors: 116 HP ( 87KW )
    Heaters:130 KW